Facilities Management & Services
"Preserving the Past, Constructing the Future"

Direct Billing Product Listing

Bookcases

General Information: Bookcases are constructed from 3/4" birch plywood and solid alder trim. Each unit is made with a rigid top, bottom, sides and back frame with adjustable shelves. The unit is finished with one coat of stain (specify "dark walnut" or "light pine") and one coat of varnish. Bookcases are available in two standard sizes. Materials and workmanship are warranted for the life of the unit. Facilities Management and Services will repair the bookcase if any failure or fatigue occurs due to defects in manufacturing for as long as the original requester owns the bookcase.

Bookcase 1: This bookcase is 43-1/2" wide x 84" high x 13-3/4" deep and includes five adjustable shelves.
Cost = $ 800.00

Bookcase 2: This bookcase is 43-1/2" wide x 43" high x 13-3/4" deep and includes two adjustable shelves.
Cost = $ 600.00

Bulletin Boards

Available Colors: grey, brown or blue

General Information: Constructed with 1/2" celotex (fiber board) backing and "Class A" fire resistant burlap covering. Framed with 1/2" x 1/2" x 1/16" anodized aluminum channel. The cost of each board ncludes material, fabrication and mounting of the board on a blank wall. Materials and workmanship are warranted by FMS for the life of the board at its original location.

Available Sizes

Installation of bulletin board provided by department: If your department would like to purchase a bulletin board from another manufacturer, FMS will install it for you on a blank wall.

Important Note: Bulletin boards are to be installed inside office areas only, not in fire exit corridors, and must be made with fire resistant materials.

Relocation of existing bulletin board: Includes removal of existing board, patching and painting of wall, and installation of board in new location.

Chalkboards & Liquid Chalk Marking Boards

General Information: These boards are constructed from 1/2" hardboard backing with a 24 ga. steel chalk or marking skin. They are framed in extruded anodized aluminum trim and are provided with a full-length extruded aluminum tray and a map rail which has hooks at every three feet on center. Smaller boards have a minimum of two map rail hooks.

Chalkboards are available in a variety of colors, including the typical blacks, greys and green. The liquid chalk marking boards are also available in different colors, however we recommend white so they match throughout the Campus. A catalog with color choices is available upon request.

Cost of the board includes the board, tax, shipping, miscellaneous materials, and the labor of 2 carpenters for installation. For boards greater than 12 feet, the labor is increased to 3 carpenters for installation. Costs do not include wall preparation. Other board configurations are available through a project request. Facilities Management and Services warrants the boards writing surface and structural integrity for the life of the board.

To Order: Send CAF for amount shown in "Total Cost" Column. State type, size, color, and location board is to be installed.

Chalkboard	Liquid Chalk Marking Board

Available Sizes

*Chalkboards and Liquid Chalk Marking boards cost more to install because they require brackets, map rails, chalk trays, trim, and they weigh more. Bulletin Boards are much lighter and only require screws to attach directly to the wall.

Installation Only for Chalkboards and Markerboards: If your department would like to purchase a chalkboard or markerboard from another manufacturer, Facilities Management and Services will install it for you on a blank wall. No wall preparation is included. (Some limitations may apply.) To Order: Send CAF for amount shown above. Indicate location board is to be installed.

Relocation of existing chalkboard or markerboard: Includes removal of existing board, patching and painting of wall, and installation of board in new location. (Some limitations may apply.) To Order: Send CAF for amount shown above. Indicate location board is to be removed and reinstalled.

Clocks

System Clocks in Centralized Buildings
Includes purchase and installation of clock, plus tie-in to centralized clock system. These are Simplex minute impulse clocks (no second hand) with 12" diameter case. Specify "round" or "square" to match other existing clocks in your building.
Cost: $200.00 ea.

Battery Operated Clocks
Includes purchase and installation of clock. These clocks have quartz movement, 12" diameter case, black hands and red second hand. Powered by one "AA" alkaline battery.
Cost: $55.00 ea.

Note: Not used in classrooms or labs unless approved in advance by Facilities Management and Services.

Coat Hangers

Includes wood mounting board with coat hooks attached, and installation. Specify number of hooks when ordering.
Cost: 2 hooks $40.00, add $5.00 for each additional hook

Keyboard Trays

Lock Rekeying

Rekeying of exsiting lockset - $50.00 (includes labor, materials and one key)
Each additional lockset on same request - $25.00 (includes labor, materials and one key per lockset)
Each additional key $6.00 each

Please specify location(s) and number of additional keys required when filling out your CAF.

NOTE: You must submit a completed key request card (attach to your CAF) for each key being issued. Please refer to the ordering link below for CAF instructions and our Key Issue Brochure for more details on key issuing policies and procedures.

Map Rail

Includes purchase and installation of 1" wide map rail on chalkboard or whiteboard, made of heavy gauge aluminum with 1/4" thick cork insert, plus one plastic map hook for each two feet of length. Standard lengths are 6', 8', 10', 12' and 16'.
Cost: $7.00 per linear foot

Pencil Sharpener

Pencil sharpener installed, includes purchase and installation of standard sharpener: $33.00 ea.

Picture Hanging

Installation of Pictures, Plaques and Hot Files

Important Note: Because of Fire Marshal regulations Hot Files will not be hung in corridors.

Projection Screen Mounting Board

The mounting board is constructed of 1x4-inch pine or birch and finished with varnish. Labor, materials and installation of the board on a blank wall.
State Cost: $76.00 ea.
Foundation Cost: $106.00 ea.

Signs

Interior signage: must comply with ADA (Americans With Disabilities Act), is constructed of 1/16" thick Gravo-Tac plastic backing with a black matted finish, and raised letters that are 1/32" thick and have a flat white color. Characters vary in height from 5/8" to 1" tall. Corresponding Grade 2 Braille is included. All new signs will be warranted against defects and/or vandalism by Facilities Management for the life of the sign at that location.

All other signs (non-ADA) are engraved type which are made of 1/8" thick plastic laminate with a black semi-gloss finish. Characters are engraved into the plastic laminate which yields white characters.

Department Signs: Department signs are 8" X 15" in size and are installed in a wooden frame with a walnut stain and varnish finish. Department signs are installed above the doors except in Tehama and O'Connell where they are installed beside the door. ADA type department signs will only be used in buildings which have ADA department signs throughout. All other will be engraved type. All new signs will be fabricated to match existing signs in the building. Cost reflects sign materials, wood frame, fabrication, and labor to install sign on a blank wall.

Name Plates: Name plates are provided with a wood stand. Name plates are not installed on doors or walls due to damage that occurs when they are removed. The price includes the materials for plate and stand and labor for fabrication. Name plates are warranted for the life of the product. Please note delivery location for nameplate on CAF.
Cost: $25.00 for one, $20.00 each for 2 or more (when ordered together).

Return to Product Index | Ordering | Cost Information | Completion | Warranty